NissTec Products arrow Nissan Xterra arrow 2005+ arrow Xterra Suspension arrow *SALE* 05+ Xterra Titan Swap Kit
Heps Designs Frontier/Titan Axe/Shovel Mount*SALE* 2" Front Lift Leveling Kit W/ UCAs ('04-'15 Titan)

*SALE* 05+ Xterra Titan Swap Kit

*SALE* 05+ Xterra Titan Swap Kit

Price per Unit (Kit): $3 176.99

Ask a question about this product


Nisstec Full Titan Swap Kit-

Fits all 2005 and Up Nissan Xterra

This is a complete Titan swap kit allowing you to keep your factory front R180 diff and gain about 10" of total travel at the tires in front.
Bolting on a combination of front Titan parts giving you about a 6" wider wheel stance and overall gain in wheel travel.
This is the Ultimate step in suspension upgrades, keeping your IFS front suspension.
Gives about 3" total front lift and 3, 3.5, or 4" adjustable rear lift with the AAL or Alcan springs and adjustable shackles

NOTE; Some minor front fender trimming may be required do to the added width of a Titan Swap (+6" wider than stock). For those wanting to run larger than a 33" tire, we highly recommend installing a 2" body lift. 34"+ tires require fender trimming even with a body lift!

Nisstec Titan Swap Radflo 2.0 Coilovers- Choose Spring Rate in Drop Down
500lb- Good for stock front weight with a plush ride--- NO EXTRA WEIGHT
550lb- Good for stock front weight and/or with the addititon of a light front bumper or skid plate.
600lb- For Plate front bumper and lighter winch and full skid plates
650lb- Good for plate front bumper and heavy winch with full armor
700lb- HD applications- Heavy plate bumper, heavy winch, full armor- Firm ride!

** NOW AVAILABLE in optional spring colors
- Silver - Comes standard
- Black
- Red
- Blue
- Please call for a custom color

Nisstec/Radflo coilovers also available in 2.5" shock bodies, with or without remote res.

- Spanner wrench for adjusting height of coilovers

- SPC upper control arms W/ Driver side firewall bolt for those that need to cut out your stock bolt.

- Nisstec Molly CVs with High Angle boots for 180 Diff- (1 Pair)

- 2" hub centric Wheel Spacers

- K83 Xterra Rear Add-A-Leaf- Diamond cut ends with anti friction pads installed.
We also offer an upgrade to custom built to order Alcan rear springs for the ultimate in off-road springs. Allowing the best rear articulation and weight capicity.
Please call us after ordering to go over all of your additional rear weight and off-road needs.
**Additional shipping costs are required for Alcan springs- Call for ship quote or we will call you after you place your order to collect additional shipping. Alcan is custom built to order. Please allow 3-5 weeks lead times for shipping
Choose in drop down

- New leaf springs center bolts

- Axle degree shims

- Longer rear U-Bolts

- Front  braided stainless Brake Lines-(Pair)

- Extended Rear Brake Lines 3 Degree axle degree shims (Pair)

- Quality inner and outter Tie Rod Ends (2 inner and 2 outer)

- Quality lower control arms (2)

- New lower control arm bump stops

- Bilstein rear 5100 series shocks- Available in 3-3.5" Rear Lift or 4" lengths. *Note 4" length require you to install longer rear bump stops in back. Choose in drop down
  Can upgrade rear shocks to Radflo 2.0" as well.

- Add a body lift to your order- Choose in drop down

- If you dont already have adjustable front camber bolts installed in your LCAs, they are required- Please add to your order


This kit is also available for use with a Titan M205 Front Diff. Choose M205 as an option and we will replace the Nisstec R180 CV Shafts with Titan M205 Shafts and required CV to diff flange bolts. M205 Front Diff NOT INCLUDED

The 2WD option does not include CVs in front

NOTE- Actual parts may vary from picture shown depending on options



Usually ships in:














Shopping Cart

Your Cart is currently empty.