woot
Featured arrow *SALE* 3" Nisstec MK84 Extended goneMOAB Edition(05+ Frontier)
2016+ Titan Grill Sticker (Titan and Titan XD)Nisstec Radflo 2.5 Extended Travel Kit ('04 to '15)

*SALE* 3" Nisstec MK84 Extended goneMOAB Edition(05+ Frontier)
View Full-Size Image


*SALE* 3" Nisstec MK84 Extended goneMOAB Edition(05+ Frontier)

Price per Unit (KIT): $1 896.31

Ask a question about this product

--- N-3MK84-KITF
Sale $1896.31  Reg Price $1996.12
All new goneMOAB edition 3" complete extended travel lift kit from Nisstec
Check out goneMOAB at www.gonemoab.com

Fits 2005 to Current Frontier

This is a complete 3" front and rear suspension lift for your Frontier.
Our MK 84 front coilovers are fully adjustable from 0-2.5" of lift coupled with our 1" top plate spacer allows up to 3.5" of front lift to be run (best ride quality is 3" of front lift or below)

Included in Kit (choose in the drop downs below for more options):
Nisstec MK84 series 2.0 coilovers-

  • 5/8” Nitro Steel shock shaft offering better corrosion resistance than chrome plating
  • Valved to your Nissan for improved on and off-road performance and handling
  • Clear-Blue Chromate zinc plated steel shock bodies
  • Adjustable from 0-2.5” of lift height. We recommend them to be run from 0-2” for best shock travel.
  • 200psi nitro charged and all shocks are dyno tested prior to shipping
  • Outfitted with Eibach Springs, the best name in springs. Available in 50 lb. increments from 500lb to 700lb to suit your vehicles aftermarket weight needs.
  • Fully assembled and ready to bolt-on with T-6 aluminum anodized top mounts.
  • Priced as a pair
  • Comes with a spanner wrench for adjusting lift height.
  • 100% Made in the U.S.A.!

We recommend the following spring rates for your Nissan
-500 lb. springs- Great for 2wd stock front weight Xterra’s and 2wd- 2 door and extra cab Frontier’s. Also work great for a plush ride on 4x4 Xterra’s with no front weight
-550 lb. springs- All stock weight 4x4 Xterra’s and Frontier’s. Good for 2wd models with skids, sliders, and tube bumpers.
-600 lb. springs- All models with plate front bumpers, lighter 8000lb winch W/syn line, skids, and sliders
-650 lb. springs- All models with plate bumpers, all of the above with some extra weight
-700 lb. springs- Only for heavy oversized bumpers, heavy 12000 lb. winch W/steel cable, heavy skids, heavy

Please Call If You Are Unsure What Spring Rate To Select.

- (2) Extended travel SPC upper control arms
- (1) Spanner wrench for coil over adjustment
- (2) NissTec rear 2” lift Add-A-Leafs w/ hardware- This custom longer rear AAL provides a great ride on and off-road, all while adding the ability to carry some extra weight on the back of your Frontier
OR
Old Man Emu CS150R Med Duty Leaf Springs
OR
Old Man Emu CS151R HD Leaf Springs (For use with 400+ LB consistant rear weight installed on the back or bed of your truck)
AND
- (2) Nisstec 1" Rear Lift Block Kit
- (2) Front braided stainless longer brake lines
- (2) Rear braided stainless longer brake lines
- (2) Rear sway bar relocation brackets
- (4) New Longer zinc plated rear Ubolts
- (2) Bilstein 5100 series nitrogen charged rear shocks (Comes Standard)
OR
- (2) Radflo Emulsion 2.0" or 2.5" Remote Res rear shocks.

 *Fronter Coilover notes:
We preset all Radflo coilovers at about 2" of front lift height with our 1" top plate spacer already installed. These presets are based off a brand new stock weight 4x4 Frontier. If you own a 2wd Frontier or have a heavy front bumper and/or winch installed, you may have to raise the coilovers or lower them. Please see the last page of our install instructions for more info on how to adjust your coilovers. Once your kits is fully installed and you have driven your Xterra around a block or two. We highly recommend parking on level ground and measuring your front end. Measure from the center of your hub (wheel) straight up to the bottom lip of the fender. If this measurement is greater than 23", you must lower your coilover!! Running your coilovers too high will cause premature shock failure and will void your warranty. Plus they will ride poorly

* Rear Lift Option notes:
** Please note additional shipping charges to the lower 48 states are built into the add-on price of OME leaf packs. If shipping to Hawaii or Alaska, we will contact you to confirm any additional shipping charges **

 

We also offer custom built to order rear Alcan or Deaver leaf packs. Please call or email us for pricing

 

 If your vehicle does not have adjustable cam bolts installed, you WILL NEED THEM!! Nissan only installed adjustable cam bolts in some 2005 year Froniters. Cam Bolts allow +/- 2 degrees camber/caster adjustment and are a must with this kit for proper alignment!!

 


Availability

Usually ships in:

24h.gif

:

:

:

:

:






Facebook

Shopping Cart

VirtueMart
Your Cart is currently empty.